Legacy AIRaider™ Radon in Water Systems
This page includes product specficiations for legacy designs of AIRaider™ 433, AIRaider™ 433-S and AIRaider™ 321 models. The following designs are no longer in production and the specifications and instructions are not relevant to our current AIRaider™ models. For specifications of our current models, please click here.
AIRaider Systems:
Click on the name of the AIRaider below for details.
AIRaider Systems Features Include:
- Up to 99+% removal of radon gas
- Compact, patented design
- Vent line diameter as small as 2"
- Multi-stage/multi-method aeration
- Remote air intake design
- Double-wall insulated tank to avoid sweating
- Built with materials that meet drinking water standards
- Tested and proven effectiveness
- Easy maintenance and years of effective performance
- Download AIRaider Brochure
- Download AIRaider Installation & Operation Manual (EZ95 not included in this document)
AIRaider 321
Value priced spray/diffused bubble aeration system with built-in off delay on the aeration cycle. System includes built-in 3/4" solenoid valves. Repressurization and bypass assemblies sold separately. Available in 115 volt only. Provides an economical alternative for radon levels do not require a more powerful aeration system. Removes up to 95+% of radon.
AIRaider 433
The AIRaider 433 has successfully and dependably removed radon and VOCs from well water for more than 15 years. It has created the standard by which other aeration equipment is measured. The 433 offers patented* multi-stage diffused bubble aeration system with UL listed control panel (features include: adjustable aeration timer, repressurization pump wire, and fused circuitry). The 433 model includes built-in 3/4" solenoid valves. The 433-1 model includes built-in 1" solenoid valves. Repressurization and bypass assemblies sold separately. Both 433 models are available prewired for 115 volt or for 230 volt operation. Remove up to 99+% of radon.
*U.S. Patent #5,614,086
AIRaider 433-S
AIRaider 433-S Series diffused bubble aeration systems have a built-in submersible pump for easier installation, a smaller footprint and quieter operation. Other features include self-priming pump set up, Pump Control with Smart Valve system, fail-safe floats and valves and more. The 433-S50 is wired for 115 volts; the 433-S75 is wired for 230 volt operation. Removes up to 99+% of radon.
AIRaider™ System Specifications
Aeration Tank Dimensions: 19.75"W x 31.25"Lx 35"H (44 gal.)
Click here to download PDF of system specifications
- Flow rate out of system must be balanced to be less than flow rate into system.
- Site-specific characteristics and system implementation may effect performance.
- Higher flow rates will require proper sizing. Please call for sizing and technical assistance.
- Dependent upon repressurization selection. Please call for technical assistance.
